 |
| Quantity: | |
|---|---|
RJN-65
XINGLE
Main features of equipment:
1. Oil bath type electric heating spray body:
a. The temperature of the spray body is uniform, the temperature is stable, and the temperature fluctuation is guaranteed to be within ≤0.1℃ (Solve the problems of the size of the balls and the false seams caused by the uneven heating temperature).
b. Due to the high temperature accuracy, the thickness of the film can be reduced by about 0.1mm (about 10% of gelatin is saved).
2. The computer automatically adjusts the injected volume
a.Automatically adjust the loading volume, save time and raw materials.
b.The loading accuracy is high, and the loading accuracy is ≤±1%, which greatly reduces the loss of raw materials.
3. The hardness of the reversing plate, the upper and lower bodies, the left and right pads reach HRC60-65. Durable: It is suitable for users to produce various liquid suspension Chinese medicine varieties, which greatly improves the service life.
4. Mold lock plate (three-point lock): does not run after locking, and it has fine-tuning function at the same time, so the operation is very simple.
5. Minimal lubrication system (reduce paraffin oil consumption and save costs) The oil volume is automatically adjusted according to the speed.
6.Built-in cold air system, equipped with chiller.
7. Rubber roller adopts independent frequency conversion speed regulation If the glue quality is not good during production, it can be solved by rubber roller speed regulation.
8. The design of cold air in the discharge area, Avoid pulling the net shaft and wrapping the net glue to make the capsule shape more beautiful.
9. The lower part of the mold adopts a special inclined bucket, which is very convenient to clean.
10. The feed pump and the machine head adopt external transmission, so the lubricating oil in the feed pump will not enter the machine head. (The feed pump is independently sealed)
Model | RJN-65 |
Rolling mould rated speed | 0-5r/min |
Rolling die size | Φ64*65mm |
Single plunger supply | 4x(0-2ml) |
Loading accuracy | ±1% |
Yield(0.5g) | 8900capsules/h |
Voltage | AC220V 50HZ |
Total power | 3.6KW |
Host size | 1400x700x1660mm |
Stereotype cage | Rotating cage size:Φ320x450mm speed:21rpm |
Plastic tank | Volume:30Lwith insulation,mixing and instrument electrical control |
Fineness:20-70microns Speed:3200rpm | |
Chiller | Refrigeration temperature:-5~16 degrees |
Drying tray | Tray size:720x520x50mm Quantity:20 |
Main features of equipment:
1. Oil bath type electric heating spray body:
a. The temperature of the spray body is uniform, the temperature is stable, and the temperature fluctuation is guaranteed to be within ≤0.1℃ (Solve the problems of the size of the balls and the false seams caused by the uneven heating temperature).
b. Due to the high temperature accuracy, the thickness of the film can be reduced by about 0.1mm (about 10% of gelatin is saved).
2. The computer automatically adjusts the injected volume
a.Automatically adjust the loading volume, save time and raw materials.
b.The loading accuracy is high, and the loading accuracy is ≤±1%, which greatly reduces the loss of raw materials.
3. The hardness of the reversing plate, the upper and lower bodies, the left and right pads reach HRC60-65. Durable: It is suitable for users to produce various liquid suspension Chinese medicine varieties, which greatly improves the service life.
4. Mold lock plate (three-point lock): does not run after locking, and it has fine-tuning function at the same time, so the operation is very simple.
5. Minimal lubrication system (reduce paraffin oil consumption and save costs) The oil volume is automatically adjusted according to the speed.
6.Built-in cold air system, equipped with chiller.
7. Rubber roller adopts independent frequency conversion speed regulation If the glue quality is not good during production, it can be solved by rubber roller speed regulation.
8. The design of cold air in the discharge area, Avoid pulling the net shaft and wrapping the net glue to make the capsule shape more beautiful.
9. The lower part of the mold adopts a special inclined bucket, which is very convenient to clean.
10. The feed pump and the machine head adopt external transmission, so the lubricating oil in the feed pump will not enter the machine head. (The feed pump is independently sealed)
Model | RJN-65 |
Rolling mould rated speed | 0-5r/min |
Rolling die size | Φ64*65mm |
Single plunger supply | 4x(0-2ml) |
Loading accuracy | ±1% |
Yield(0.5g) | 8900capsules/h |
Voltage | AC220V 50HZ |
Total power | 3.6KW |
Host size | 1400x700x1660mm |
Stereotype cage | Rotating cage size:Φ320x450mm speed:21rpm |
Plastic tank | Volume:30Lwith insulation,mixing and instrument electrical control |
Fineness:20-70microns Speed:3200rpm | |
Chiller | Refrigeration temperature:-5~16 degrees |
Drying tray | Tray size:720x520x50mm Quantity:20 |
