 |
| Quantity: | |
|---|---|
NJP-200C
XINGLE
NJP-200C Automatic Capsule Filling Machine
New Material Hopper
|
|
It adopts the disc valve feeding method and is equipped with a vibration device. It solves the problem that the traditional screw feeding device has no fluidity and often fails to feed powders with poor fluidity such as Chinese herbal medicines and proprietary Chinese medicines. Easy to disassemble, easy to replace and clean. | |
Sowing Rack | |
|
|
Driven by guide rail, it has high precision and long service life. The closed design effectively prevents waste capsules and dust from entering. Good stability, orderly seeding, and accurate direction adjustment. | |
new turntable | Filling combination |
|
|
One-piece processing and molding, compact structure and no splicing gap, with good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring, which achieves no noise, small size, and low load. Small and high precision. The interior of the fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years. Patent No.: (ZL 2015 2 1021530.0) | Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4) |
filling base | Integrated powder inhaler |
|
|
The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the secondary use of the powder. | When the abnormal capsule cannot be separated normally, the medicine powder entering the hole of the lower die is directly sucked into the medicine powder recovery device by the medicine powder recovery device at the filling station, which can effectively recover the medicine powder and avoid loss and waste. |
Capsule lock mechanism | Cleaning Die Hole Device |
|
|
The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod. | Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading. |
Powder Recycler | |
|
|
Adopting negative pressure technology, equipped with an independent distribution system for drug powder, it can accurately recover drug powder and avoid cross-contamination. The recovered drug powder can be directly re-produced, which is convenient and efficient | |
Technical Parameters | Specifications | NJP-200C type |
Maximum Capacity | 12000 pcs/hour | |
machine weight | 600kg _ | |
Machine volume | 980 × 710 × 1880mm (height with powder feeder: 2290mm) | |
power supply | 380/220V 50Hz | |
total power | 3kw _ | |
Number of holes | 2 holes | |
Vacuum _ | 20m 3 /h -0.04 ～ -0.08M P a | |
vacuuming | 17.6Kpa 180 m³/h | |
compressed air | Air consumption 4m³/h Pressure 0.3～0.4MPa | |
working noise | ≤ 75dBA _ | |
Working temperature | 21°C±3°C | |
working relative humidity | 40-55% | |
Chance | Empty capsule ≥ 99.9%. Full capsule ≥ 99.8% | |
Adapt Capsules | 00#-5# capsule | |
Loading accuracy | Western medicine ± 3%. Traditional Chinese medicine ± 4% | |
Adapt to the filling range | Powder, Granule, Pellet, Tablet | |
special function | Powder collector function | |
Material | 316L stainless steel is used for parts in direct contact with medicines | |
specification | Fully sign cGMP requirements |
NJP-200C Automatic Capsule Filling Machine
New Material Hopper
|
|
It adopts the disc valve feeding method and is equipped with a vibration device. It solves the problem that the traditional screw feeding device has no fluidity and often fails to feed powders with poor fluidity such as Chinese herbal medicines and proprietary Chinese medicines. Easy to disassemble, easy to replace and clean. | |
Sowing Rack | |
|
|
Driven by guide rail, it has high precision and long service life. The closed design effectively prevents waste capsules and dust from entering. Good stability, orderly seeding, and accurate direction adjustment. | |
new turntable | Filling combination |
|
|
One-piece processing and molding, compact structure and no splicing gap, with good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring, which achieves no noise, small size, and low load. Small and high precision. The interior of the fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years. Patent No.: (ZL 2015 2 1021530.0) | Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4) |
filling base | Integrated powder inhaler |
|
|
The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the secondary use of the powder. | When the abnormal capsule cannot be separated normally, the medicine powder entering the hole of the lower die is directly sucked into the medicine powder recovery device by the medicine powder recovery device at the filling station, which can effectively recover the medicine powder and avoid loss and waste. |
Capsule lock mechanism | Cleaning Die Hole Device |
|
|
The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod. | Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading. |
Powder Recycler | |
|
|
Adopting negative pressure technology, equipped with an independent distribution system for drug powder, it can accurately recover drug powder and avoid cross-contamination. The recovered drug powder can be directly re-produced, which is convenient and efficient | |
Technical Parameters | Specifications | NJP-200C type |
Maximum Capacity | 12000 pcs/hour | |
machine weight | 600kg _ | |
Machine volume | 980 × 710 × 1880mm (height with powder feeder: 2290mm) | |
power supply | 380/220V 50Hz | |
total power | 3kw _ | |
Number of holes | 2 holes | |
Vacuum _ | 20m 3 /h -0.04 ～ -0.08M P a | |
vacuuming | 17.6Kpa 180 m³/h | |
compressed air | Air consumption 4m³/h Pressure 0.3～0.4MPa | |
working noise | ≤ 75dBA _ | |
Working temperature | 21°C±3°C | |
working relative humidity | 40-55% | |
Chance | Empty capsule ≥ 99.9%. Full capsule ≥ 99.8% | |
Adapt Capsules | 00#-5# capsule | |
Loading accuracy | Western medicine ± 3%. Traditional Chinese medicine ± 4% | |
Adapt to the filling range | Powder, Granule, Pellet, Tablet | |
special function | Powder collector function | |
Material | 316L stainless steel is used for parts in direct contact with medicines | |
specification | Fully sign cGMP requirements |
